Posted on

Striped T-shirt dress with round pockets. Step-by-step sewing instructions.

 


T-shirt dress  step-by-step sewing instructions.

1. Pattern layout

Laying out pattern on fabric

If you can sew a T-shirt you’re sure can make this T-shirt dress, it is pretty easy. When laying out knitted fabric make sure it does not hang off the edge of your table. It will prevent uneven stretching and permanently skewed garment. If you have an opportunity, leave spread fabric overnight, it will allow fibers to settle after being rolled in the bolt.  To mark and cut the pattern you will need:

  • Ball-point pins;
  • Tailor’s chalk or dry soap sliver.
  • Sharp bent-handled shear

2.  Attaching the yoke to the main piece.

Sew on yokes both to the front and to the back, right sides in, of course. If you are going to use a top stitching machine later, there is no need to overlock it first, straight stitch on sewing machine is enough. If you do not have a top stitcher, overlock the edges together and make a decorative line with your sewing machine.

Attaching the yokes to the back

3. Prepare the pockets.

  • Opening first – overlock the raw edge, fold and stitch. If topstitching, it is all done in one step.
  • Baste the pockets’ round edge, spacing the pinches evenly. If the bulk is too great cut out the tiny wedges to flatten the seam allowances.  Don’t be tempted to miss the basting step, it’s essential for the smooth round fold.

Basting raw edges on the pocket

Note: The other method to sew the smooth round pocket is to use an ironing template. Cut the heatproof material in the exact shape of your pocket and iron-in the edges.  Please mind that you are working with the knitted fabric and the stretching might get uneven, let your level of experience and skill, guide you.

4. Placing pockets.

Pin  the pockets in place and sew them on.

Place the pockets

5. Sewing front and back together.

Now, you are ready to join the front and the back parts. Put right sides in and overlock together the shoulder and the side seams.

Overlocking the side and shoulder seams

6. Binding the neck and armholes.

  • First you will have to determine the length of the bands you need. Patterns are given in the exact length of the edges to be bind, without allowance for the stretch. Every knitted fabric stretches differently and the amount ranges between 1% and 500%.  Pin the bands in place with the desired tension and cut off the surplus of fabric.
  • Stitch the ends of your adjusted binding pieces.

Bindining the armholes

Note:

Neckline binding will demand more stretch then armhole one.

7. Binding raw edges

Bind the neck and armhole edges with any method you are comfortable with.

Binding the t-shirt neck pinning technique

8. Putting finishing touches

Hem the bottom edge, top stitch around the neck and armholes if desired.  Steam. Your T-shirt dress is ready.

Flat sketch of a t-shirt dress
Note:

When pressing the seams after each stage do not stretch the raw edges!


Useful sewing techniques:

6 common techniques to rib trim knitted fabrics
Binding the T-Shirt neck
Leave a Reply

Your email address will not be published. Required fields are marked *